Charleston Beige Travertine Effect Matt Porcelain Wall & Floor Tile 100x300mm (Per Box of 19 Tiles)

Sold by the box – 19 tiles per box, covering around 0.57m². Each 100x300mm tile is 0.03m², so a box works out at roughly £77.37 per m² (£2.32 a tile). We only supply full boxes.

Warm beige travertine markings on a small 100x300mm brick. Charleston Beige in this size suits a splashback, a shower wall or a run of tiles above a worktop, where the narrow format adds texture. The matt glaze keeps it soft and natural.

Nineteen tiles make a box, covering 0.57m². Lay them in a horizontal half-bond, stack them in neat columns or angle them into a herringbone. Because the tile is porcelain it also goes on the floor, so a brick-pattern cloakroom floor is possible.

It is hard-wearing and easy to clean, suitable for bathrooms, kitchens, hallways and living areas. Match it with the larger beige sizes or contrast it against the Charleston white or grey for a two-colour layout that still shares the same stone texture.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 0.57 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a flexible, cement-based porcelain adhesive on a flat, sound wall, combed through a fine notch. Keep 2-3mm joints and a beige or sand grout for a quiet finish. Floors need a full adhesive bed. Open two or three boxes and mix the tiles as you work.

See the whole range

Charleston is a travertine-effect porcelain range in beige, grey and white, cut as 100x300mm, 300x600mm, 600x600mm, 600x1200mm and 1200x1200mm tiles, with mosaic sheets in herringbone and brick patterns. See every Charleston tile.