Charleston Grey Travertine Effect Matt Porcelain Wall & Floor Tile 100x300mm (Per Box of 19 Tiles)

Sold by the box – 19 tiles per box, covering around 0.57m². Each 100x300mm tile is 0.03m², so a box works out at roughly £77.37 per m² (£2.32 a tile). We only supply full boxes.

A 100x300mm brick format of Charleston Grey, made for splashbacks, shower walls and borders. The small tile carries the same light grey travertine banding as the large sizes, but broken into narrow strips it gives a wall more texture and more grout line.

Lay it horizontally in a half-bond for a classic brick wall, stack it vertically for a modern look, or set it in a herringbone around a basin. Nineteen tiles to a box cover 0.57m², which suits small areas and feature panels where you only need a box or two.

The tile is porcelain and listed for floors as well as walls, so it can run onto a cloakroom floor or a shower tray in a brick pattern. The matt glaze is easy to wipe. It matches the 300x600mm and 600x600mm greys for a scheme that mixes scales.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 0.57 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Small bricks lay best on a flat wall with a flexible adhesive combed through a fine-notch trowel. Keep a 2-3mm joint and use a grout a shade darker than the tile to pick out the pattern. On floors, bed fully in adhesive. Draw tiles from several boxes as you go.

See the whole range

Charleston travertine-effect porcelain comes in grey, white and beige, with each colour made as a 100x300mm brick, 300x600mm, 600x600mm, 600x1200mm and 1200x1200mm, plus herringbone and brick mosaic sheets. See every Charleston tile.