Florence Ivory Flagstone Effect Matt Porcelain Wall & Floor Tile 300x500mm (Per Box of 7 Tiles)

Sold by the box – 7 tiles per box, covering around 1.05m². Each 300x500mm tile is 0.15m², so a box works out at roughly £46.00 per m² (£6.90 a tile). We only supply full boxes.

Florence Ivory in the 300x500mm rectangle. The format suits a brick-bond floor or wall, and it is the link between the small square and the large square when you build a random modular layout. A box of seven covers 1.05m².

The surface is a creamy ivory with the soft tonal variation and gently worn edge of aged stone. It is matt, so it stays calm under bright light, and the pale colour makes smaller rooms feel more open. Tiles vary a little, as intended.

Porcelain gives it the strength for kitchen and hallway floors and the water resistance for bathrooms, and it is suitable for walls indoors too. There is no sealing to do. Pair it with the ivory 300x300mm for a two-size pattern, or add the pale grey for contrast.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.05 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix to a flat substrate with flexible porcelain adhesive, back-buttered on floors, and keep joints at 3-5mm. If you are running this size with the 300x300mm and 500x500mm, set out the module before you start so the joints line through. Grout in a pale stone colour and mix boxes.

See the whole range

In Florence the flagstone effect comes in ivory, autumn grey, pale grey, grey and white, each as a 300x300mm, 300x500mm and 500x500mm module so a floor can be set out in a random mix. See every Florence tile.