Hatteras White Marble Effect Matt Porcelain Wall & Floor Tile 300x600mm (Per Box of 6 Tiles)

Sold by the box – 6 tiles per box, covering around 1.08m². Each 300x600mm tile is 0.18m², so a box works out at roughly £42.96 per m² (£7.73 a tile). We only supply full boxes.

A 300x600mm white marble-effect tile with faint grey veins and a matt surface. The format is a bathroom staple: small enough to turn corners and fit around fixtures, large enough to keep grout lines to a minimum. The veining is soft and spread thinly, so the overall tone is white.

Six tiles per box cover 1.08m². Lay them in a horizontal brick pattern to widen a narrow bathroom, stack them for a clean, modern grid, or set them vertically to add height. The colour continues in the 600x600mm and 600x1200mm matt tiles for the floor.

Rectified porcelain for indoor walls and floors. The matt finish is easy to keep looking clean and does not reflect light in a way that highlights every mark. As porcelain it is dense and hard-wearing, so the same tile can run down a wall and across a floor.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix with a flexible porcelain adhesive, using a notched trowel and back-buttering wall tiles so they sit flat. The rectified edge lets you keep a 2mm joint; grout in white or a pale grey. Lay from several boxes at once. In showers, make sure the background is suitably tanked first.

See the whole range

Hatteras is a three-colour marble-effect porcelain range – white, calacatta gold and gold-veined ivory – each offered in polished and matt and in 300x600mm, 600x600mm and 600x1200mm sizes. A gold polished 1200x1200mm, a white 20mm paving slab and a black glass stick mosaic sit alongside. See every Hatteras tile.