Kennebunk White Metallic Satin Porcelain Wall & Floor Tile 600x1200mm (Per Box of 2 Tiles)

Sold by the box – 2 tiles per box, covering around 1.44m². Each 600x1200mm tile is 0.72m², so a box works out at roughly £68.61 per m² (£49.40 a tile). We only supply full boxes.

A white tile with a difference: Kennebunk White has a pearl-like metallic sheen over a soft cement-style ground, so it reads as warm and faintly lustrous rather than flat. The satin, semi-polished face reflects light without the hard glare of a full gloss.

The large 600x1200mm format is made for walls and floors where joints should be few. Use it in a shower enclosure, across a bathroom floor, or in a kitchen where the sheen brightens the space. Two tiles per box cover 1.44m².

Porcelain with a satin finish, rated for indoor walls and floors. The matching white hexagon from the same range picks out a niche, a splashback or a border in the same pearl tone.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.44 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

A large satin tile needs a flat substrate and full adhesive contact: comb a flexible porcelain adhesive on the base and back-butter each tile, then fit levelling clips. Allow a 2 to 3mm joint with a white grout. Wipe the sheen face clean before the grout dries to avoid a dull film. Two fitters to lift; cut on a wet saw.

See the whole range

The Kennebunk range comes in three metallic colours, mint, silver and white, as a 600x1200mm slab and a small 150x170mm hexagon, with a decorated tropical hexagon in mint and silver, so large and small formats can be mixed in one scheme. See every Kennebunk tile.