Ocean City Greige Stone Effect Satin Ceramic Brick Decor Wall Tile 300x600mm (Per Box of 10 Tiles)

Sold by the box – 10 tiles per box, covering around 1.80m². Each 300x600mm tile is 0.18m², so a box works out at roughly £46.06 per m² (£8.29 a tile). We only supply full boxes.

A raised brick relief moulded into a greige stone-effect wall tile. Each 300x600mm piece carries several rows of small bricks with recessed lines between them, and the satin finish picks out the ridges so the texture shows even in a soft colour. The tone matches the plain greige tile exactly.

The decor is best used in measured doses. A single column beside a mirror, the wall above a bath or the back of a shower are typical spots, with the plain greige tile elsewhere. It also works as a panel behind a hob or a strip in a hallway.

Ceramic, and rated for walls only, so it is not for the floor. Boxes contain ten tiles and cover 1.80m², which is usually enough for one feature panel. It matches the greige 300x600mm plain wall tile and the 600x600mm greige porcelain floor tile from the same range.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.80 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Suitable for walls, not floors. Use a flexible wall adhesive on a sound, dry substrate with joints of around 2 to 3mm. Take tiles from two or three boxes as you go. If pairing with the plain tile of the same colour, keep both on the same grout joint so the relief sits in line.

See the whole range

The Ocean City brick decor is made in greige, white, grey and anthracite, each matched to a plain 300x600mm satin wall tile and a 600x600mm matt porcelain floor tile in the same stone colour. See every Ocean City tile.