Ocean City White Stone Effect Satin Ceramic Brick Decor Wall Tile 300x600mm (Per Box of 10 Tiles)

Sold by the box – 10 tiles per box, covering around 1.80m². Each 300x600mm tile is 0.18m², so a box works out at roughly £46.06 per m² (£8.29 a tile). We only supply full boxes.

This is the decor version of the white stone wall tile. The face is moulded with a raised brick pattern, so a single 300x600mm tile reads as a panel of small bricks with recessed joints between them. The satin finish and white stone colour are the same as the plain tile, which lets the two sit side by side.

It is meant for a feature area rather than a whole room: the wall behind a basin, the back of a shower niche, a panel between kitchen units or a chimney breast in a living area. The relief gives texture without adding colour, so the scheme stays light.

Ceramic and for walls only; it is not a floor tile. Sold in boxes of ten, covering 1.80m², so one box is usually enough for a feature panel. Use it with the plain white 300x600mm tile around it and the 600x600mm white porcelain underfoot.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.80 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

For walls only; the ceramic body is not rated for floors. A ready-mixed or cement-based wall adhesive is fine on plaster or board. Keep joints at 2 to 3mm. Plan the setting-out so the brick-bond offset lines up with any decor tiles used alongside.

See the whole range

Ocean City pairs each of its four colours, white, greige, grey and anthracite, with a plain 300x600mm satin wall tile, this brick-relief decor and a 600x600mm matt porcelain for floors, so walls and floors coordinate. See every Ocean City tile.