Savannah Light Grey Stone Effect Matt Porcelain Wall & Floor Tile 600x1200mm (Per Box of 2 Tiles)

Sold by the box – 2 tiles per box, covering around 1.44m². Each 600x1200mm tile is 0.72m², so a box works out at roughly £61.60 per m² (£44.35 a tile). We only supply full boxes.

Light grey aged-stone porcelain in a 600x1200mm plank. The surface shows faint sediment lines and soft tonal shifts, like a worn limestone, and the matt finish keeps it looking natural rather than printed. It is a pale, cool neutral that lifts a room without feeling cold.

The long format is made for large floors and full-height walls, where a tile this size needs few joints and the stone markings can run uninterrupted. Lay it straight or in an offset brick pattern. It pairs with the matching brick relief decor for a feature wall.

As a porcelain it is dense, water-resistant and rated for indoor walls and floors, which makes it an easy choice for a bathroom, kitchen, hallway or open living space. A box holds two tiles, 1.44 square metres, so allow extra for cuts.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.44 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a flexible porcelain adhesive and a full solid bed on floors, back-buttering each tile. A 2-3mm joint suits the size. The floor must be flat, as a 1200mm tile shows any hollows. Open a few boxes and mix the tiles so the stone markings vary naturally across the area.

See the whole range

The Savannah range is an aged-stone porcelain in light grey and sand, made in 300x600mm, 600x600mm, 600x1200mm and 1200x1200mm plain tiles with a 600x1200mm brick decor and a 300x300mm mosaic, so floors, walls and feature areas can be drawn from one family. See every Savannah tile.