Whidbey White Stone Effect Matt Ceramic Wall Tile 300x600mm (Per Box of 6 Tiles)

Sold by the box – 6 tiles per box, covering around 1.08m². Each 300x600mm tile is 0.18m², so a box works out at roughly £46.02 per m² (£8.28 a tile). We only supply full boxes.

A white bathroom wall with a little more to it than plain white. This 300x600mm rectified ceramic carries a soft natural stone print in a warm white, matt finished, so the surface has gentle depth and does not glare. It keeps a small room bright and sits well with any colour of fittings.

Stack it for a clean grid, offset it for a brick bond, or set it vertically to add height. The rectified edges allow a slim joint so the wall reads as a near-continuous surface. It is for interior walls only; the matching floor is the white 592x592mm porcelain in the range.

Ceramic is light, easy to cut and quick to fit, which suits bathroom and kitchen walls where there are many cuts. Combine it with the white structured decor for a textured feature wall in the same tone. Six tiles in a box cover 1.08 square metres.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Walls only, not for floors. Use a flexible wall adhesive with a notched trowel and set out from a level line. A 2mm joint suits the rectified edge; use clips to stop lipping. A white or pale grey grout keeps it clean-looking. Keep sponges and water clean during grouting so the matt white is not marked.

See the whole range

The Whidbey range is a white and grey natural stone look with a 592x592mm rectified porcelain for floors and walls, rectified ceramic wall tiles in 300x600mm and 350x1000mm, and structured relief decors in both wall sizes, so walls and floors can be planned together. See every Whidbey tile.