Whidbey White Stone Effect Matt Ceramic Wall Tile 350x1000mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 1.05m². Each 350x1000mm tile is 0.35m², so a box works out at roughly £53.81 per m² (£18.83 a tile). We only supply full boxes.

For a bathroom that needs to feel bigger, a 350x1000mm white plank with slim rectified joints is hard to beat. The Whidbey white stone print is soft and warm, the finish is matt, and the long format means a wall is covered with very few grout lines to break up the surface.

Lay it horizontally in a brick bond to stretch a narrow room, or vertically to lift a low ceiling. It is an interior wall tile only. The white 592x592mm porcelain floor and the white structured decor in the same tone complete the room.

As a ceramic it is light enough to handle in one piece and cuts cleanly on a long-bed cutter, which matters on a tile a metre long. The matt surface hides water spots better than a gloss white. Three tiles per box cover 1.05 square metres.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.05 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Walls only, not for floors. Check the wall is flat along the length of the tile, then fix with a flexible wall adhesive, combing the wall and back-buttering the tile. Work from a level line with a 2mm joint and clips. A white grout keeps the surface clean; keep sponge water clean to avoid marking the matt face.

See the whole range

Whidbey covers a white and grey natural stone look with a 592x592mm rectified porcelain for floors and walls, rectified ceramic wall tiles in 350x1000mm and 300x600mm, and structured relief decors in both wall sizes, so the same finish can run across every surface in a room. See every Whidbey tile.