Wilmington White Plain Matt Porcelain Wall & Floor Tile 300x600mm (Per Box of 5 Tiles)

Sold by the box – 5 tiles per box, covering around 0.90m². Each 300x600mm tile is 0.18m², so a box works out at roughly £46.00 per m² (£8.28 a tile). We only supply full boxes.

A soft white porcelain in a natural matt finish. It is a shade warmer than the snow white in the same range, with a chalky surface that does not reflect light, so it reads as calm and plain. It suits a simple, pared-back bathroom.

In the 300x600mm size, five tiles come in a box and cover 0.9m². Stack it vertically on a shower wall or lay it in a brick bond across a bathroom floor. The rectified edge keeps the grout joints narrow. Use it with the matching 600x600mm on the floor so walls and floor share one white.

Made from full-bodied porcelain stoneware, so the white runs through the tile. The manufacturer lists it for walls and floors in bathrooms, kitchens, conservatories, hallways and living areas, in both residential and commercial settings. The matt face hides water spots and does not need polishing to keep its look.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 0.90 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a white flexible porcelain adhesive and a solid bed on floors. Grout with a white or off-white grout at 2-3mm and sponge the matt face clean before the grout dries into it. Set out from the centre of the wall so the end cuts match. Draw tiles from two or three boxes at once.

See the whole range

Wilmington is a plain porcelain made in nine shades, snow, white, cream, beige, dove, silver, grey, carbon and black, in matt, polished and anti-slip finishes. Sizes are 300x600mm, 600x600mm and 600x1200mm, with a 35x35mm mosaic sheet to match. See every Wilmington tile.