Biloxi Sapphire Metal Effect Textured Porcelain Wall & Floor Tile 1000x1000x10mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 3.00m². Each 1000x1000mm tile is 1m², so a box works out at roughly £85.03 per m² (£85.03 a tile). We only supply full boxes.

A one-metre square in the sapphire colourway: steel blue and violet patina over a weathered-metal surface, lightly textured. At this size each tile shows a full sweep of the patterning, with streaks and clouding that look like a single sheet of aged plate rather than a printed repeat.

The 1000x1000mm format is for large floors where you want as few joints as possible: an open-plan kitchen and living space, a wide hallway or a big conservatory. On a wall it makes a near-seamless panel behind a bath or a run of kitchen units.

A 10mm textured porcelain, listed for floors and usable on walls. Each box holds three tiles and covers 3.00m², full boxes only. The 500x1000mm sapphire tile shares the finish for smaller rooms, and a 20mm slab takes it outdoors.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 3.00 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

At one metre square each tile is heavy and must be fully bedded, with adhesive on both tile and floor and no hollow spots. Two people are needed to position each one. Use a 3mm joint and a levelling system, and check the subfloor is flat to within 3mm over 2m before starting.

See the whole range

Two Biloxi colourways, oxidised rust and steel-blue sapphire, share one weathered-metal surface across three formats: 500x1000x10mm and 1000x1000x10mm porcelain tiles for inside, and a 500x1000x20mm textured paving slab for patios and terraces. See every Biloxi tile.