Boothbay Blend Vintage Pattern Matt Porcelain Wall & Floor Tile 500x1000mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 1.50m². Each 500x1000mm tile is 0.5m², so a box works out at roughly £69.40 per m² (£34.70 a tile). We only supply full boxes.

Blend mixes the warm and cool tones of the range on one tile: soft blues, greens and sandy neutrals, with a subtle baroque-inspired pattern that looks as if decades of wear have faded it into the surface. The matt finish adds to the aged, slightly chalky feel.

At 500x1000mm this is a large tile, and the pattern is scaled to it, so one or two tiles make a feature on a bathroom wall or a kitchen splashback and a full floor reads as a worn, patterned carpet. It also suits hallways, conservatories and living areas.

A matt porcelain rated for indoor walls and floors. Three tiles to a box, covering 1.50m², sold in full boxes. The same blend colourway is made as a 20mm paving slab, so the pattern can carry on outside.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.50 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

A large porcelain, so use a flexible adhesive with a 10mm or larger notched trowel and back-butter every tile for full support on floors. Keep joints around 3mm and use a levelling system to avoid lipping. On walls, confirm the substrate can carry a 500x1000mm tile.

See the whole range

Boothbay carries a faint baroque pattern over soft, aged tones in three colourways, blend, blue and sand, as a 500x1000mm matt porcelain for indoor walls and floors and as a 20mm textured paving slab in the same size for outside, so the pattern can continue from the kitchen onto the patio. See every Boothbay tile.