Branford Ivory Stone Effect Satin Porcelain Wall & Floor Tile 450x900mm (Per Box of 2 Tiles)

Sold by the box – 2 tiles per box, covering around 0.81m². Each 450x900mm tile is 0.405m², so a box works out at roughly £68.64 per m² (£27.80 a tile). We only supply full boxes.

Warm and pale. The ivory 450x900mm tile prints the fine grain of Cardoso stone in a cream-beige, and the semi-polished satin surface gives it a gentle glow that makes a room feel lighter. It is a quieter choice than a white marble effect and sits well with wood and brass.

Boxed in pairs covering 0.81m², the large rectangle is built for floors and tall walls. Laid in a third-offset brick bond it stretches a hallway; stacked straight on a bathroom wall it looks like slabs of stone. The ivory 70x280mm brick in the same range makes a border or niche lining.

Porcelain, suitable for walls and floors inside and outside. For shower floors or exterior paving in this colour, look at the anti-slip versions in the Branford range. Limited stock, so order the full amount together.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 0.81 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix large tiles onto a flat base with a cementitious adhesive on both surfaces, bedding fully with no hollows. Keep 2 to 3mm joints and limit brick-bond offsets to a third of the length. Outdoors use frost-resistant adhesive and grout. Work from both boxes to blend the print.

See the whole range

Branford runs a fine grey stone look through a slim 70x280mm brick and a large 450x900mm tile, in ivory, light grey and dark grey, with satin and anti-slip finishes on the large size. See every Branford tile.