Charleston White Travertine Effect Matt Porcelain Wall & Floor Tile 600x600mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 1.08m². Each 600x600mm tile is 0.36m², so a box works out at roughly £53.80 per m² (£19.37 a tile). We only supply full boxes.

This is the white in the Charleston range cut as a 600x600mm square. Off-white rather than brilliant, it carries soft pale veining that gives the surface some movement without shouting. A matt finish keeps the tone warm and avoids the clinical look of a gloss white.

Squares of this size lay quickly and suit both floors and walls. On a floor, stack them straight for a clean grid or offset them by half for a more relaxed stone pattern. On a wall, the same tile behind a basin or along a bath keeps the room coherent.

The porcelain body is hard and dense, built for everyday use in bathrooms, kitchens, hallways and living areas. Spills wipe off the matt glaze easily. A box holds three tiles and covers 1.08m², and smaller bricks and mosaic sheets in the same white are available for details.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix with a flexible cement-based adhesive suitable for porcelain, laid as a full bed on floors. Keep joints to 2-3mm and grout in a light tone to let the veining carry the pattern. Blend tiles from more than one box as you lay, and check the surface is flat first.

See the whole range

In the Charleston range the white, grey and beige travertine effects are each available as 100x300mm, 300x600mm, 600x600mm, 600x1200mm and 1200x1200mm tiles, with mosaic sheets in herringbone and brick patterns. See every Charleston tile.