Fairhope Multicolour Mix Stone Effect Matt Porcelain Wall & Floor Tile 300x600mm (Per Box of 6 Tiles)

Sold by the box – 6 tiles per box, covering around 1.08m². Each 300x600mm tile is 0.18m², so a box works out at roughly £46.02 per m² (£8.28 a tile). We only supply full boxes.

Fairhope Multicolour Mix blends the white, sand and greige stone tones of the range on one tile, with darker marble-look inserts breaking up the surface. Each piece carries a soft shell-like pattern rather than a hard print, so the mix reads as varied natural stone once a few boxes are laid out.

At 300x600mm the tile suits a brick bond or a straight stack, and the rectified edge keeps joints tight. It is made for hallways and living areas and works just as well on a bathroom or kitchen wall, where the mixed tones hide marks better than a plain colour.

The porcelain body is dense and hard-wearing, with a matt surface treated with an antimicrobial formulation that helps cut bacteria and odours. Each box holds six tiles covering 1.08m². It needs no sealing and resists staining, so routine cleaning is all it asks.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix with a flexible cementitious adhesive and a full bed on floors. Because the tile is rectified, a 2–3mm joint gives a clean result. Shuffle tiles from several boxes as you lay so the mixed tones and inserts spread evenly rather than clustering.

See the whole range

Fairhope is a matt stone-effect porcelain range with an antibacterial surface, offered in white, sand and greige plus three mixed designs in beige, grey and multicolour that add darker marble-look inserts. It comes in 300x600mm, 600x600mm and 600x1200mm, all rectified, for walls and floors. See every Fairhope tile.