Fairhope White Stone Effect Matt Porcelain Wall & Floor Tile 300x600mm (Per Box of 6 Tiles)

Sold by the box – 6 tiles per box, covering around 1.08m². Each 300x600mm tile is 0.18m², so a box works out at roughly £46.02 per m² (£8.28 a tile). We only supply full boxes.

Fairhope White is a pale stone-look tile with a soft, shell-like surface pattern rather than a flat printed white. It keeps rooms light and pairs easily with the sand, greige and mix tiles from the same range.

Each 300x600mm tile is rectified, so it can be laid stacked or brick-bonded with a narrow joint. Boxes hold six tiles and cover 1.08m². It is designed for hallways and living areas and is equally at home on bathroom and kitchen walls.

The porcelain body resists wear and water, and the matt surface carries an antimicrobial treatment that reduces bacterial load and odours, making it a practical white for floors that get a lot of traffic. It needs no sealing after fitting.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a white flexible adhesive to avoid any shadowing through a pale tile, and bed floor tiles fully. A 2–3mm joint with a white or light grey grout keeps the surface continuous. Blend tiles from several boxes as you lay.

See the whole range

Fairhope is a matt stone-effect porcelain range with an antibacterial surface, offered in white, sand and greige plus three mixed designs in beige, grey and multicolour that add darker marble-look inserts. It comes in 300x600mm, 600x600mm and 600x1200mm, all rectified, for walls and floors. See every Fairhope tile.