Gulfport Dark Grey Concrete Effect Matt Porcelain Wall & Floor Tile 600x1200mm (Per Box of 2 Tiles)

Sold by the box – 2 tiles per box, covering around 1.44m². Each 600x1200mm tile is 0.72m², so a box works out at roughly £52.29 per m² (£37.65 a tile). We only supply full boxes.

Dark Grey in the 600x1200mm slab is the boldest piece in the Gulfport range: a deep charcoal concrete face with muted shading and very few joints. On a shower wall it gives a hotel-style enclosure; on a floor it grounds a large kitchen or living space.

The large format suits big walls and open floors where joints should disappear. Pair it with pale walls and timber for contrast, or run it floor-to-wall for a dark wet room. The charcoal tone hides footprints and water marks well.

This is a 9mm rectified porcelain with a natural matt finish that does not reflect light. It is low-absorption, stain-resistant and needs no sealing, so it stands up to kitchens, hallways and family bathrooms. Suitable for internal walls and floors, including conservatories.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.44 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix with full-bed flexible porcelain adhesive on a flat, primed base, back-buttered, with a levelling clip system. Keep a 2mm joint and use a charcoal grout; wipe pale adhesive out of the joints before it sets as it will show against the dark face. Lift with two people.

See the whole range

The Gulfport range covers six gently shaded neutral concrete tones, from ice white through warm beige and taupe grey to light, mid and dark grey. Every colour is a natural matt porcelain and every one is available in 300x600mm, 600x600mm and 600x1200mm. See every Gulfport tile.