Gulfport Dark Grey Concrete Effect Matt Porcelain Wall & Floor Tile 600x600mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 1.08m². Each 600x600mm tile is 0.36m², so a box works out at roughly £38.24 per m² (£13.77 a tile). We only supply full boxes.

Dark Grey in the 600x600mm square makes a deep charcoal floor with the muted mottling of concrete. It is dramatic without being black, and it anchors a scheme of white walls and pale furniture. In a bathroom it suits a wet-room floor that needs to hide marks.

A large square format keeps the grout grid sparse, which matters with a dark tile where pale joints would show. Lay it across a kitchen or hallway floor for a solid, ground-level contrast to lighter walls.

It is a 9mm rectified porcelain with a natural matt face. The surface does not reflect light, stays comfortable underfoot and resists staining, so it suits a busy kitchen as well as a bathroom. Suitable for walls and floors indoors, with no sealing needed after grouting.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Lay on a flat base with full-coverage flexible porcelain adhesive and a levelling system. Keep a 2mm joint and grout in charcoal or anthracite; pale adhesive squeezed into the joints shows on a dark tile, so clean them before it sets. Blend tiles from several boxes.

See the whole range

Gulfport runs to six delicately shaded concrete-effect neutrals, all matt porcelain, with 300x600mm, 600x600mm and 600x1200mm sizes in every colour. Mix the formats in one colour, or step from a pale grey floor to a darker grey wall within the same range. See every Gulfport tile.