Gulfport Warm Beige Concrete Effect Matt Porcelain Wall & Floor Tile 300x600mm (Per Box of 7 Tiles)

Sold by the box – 7 tiles per box, covering around 1.26m². Each 300x600mm tile is 0.18m², so a box works out at roughly £38.25 per m² (£6.89 a tile). We only supply full boxes.

Where most concrete-effect tiles lean cold, Gulfport Warm Beige takes the same soft cement shading and warms it to a sandy, biscuit tone. The variation is gentle rather than dramatic, so a wall of it looks even from across the room and only shows its depth up close.

The 300x600mm rectangle lays quickly and suits mid-sized rooms where a 600x1200mm slab would mean a lot of cuts. Run it in a straight stack for a modern look or offset by a third for something softer. It pairs well with oak furniture and brushed brass fittings.

This is a 9mm porcelain with rectified edges and a natural matt face. The surface is low-sheen and does not show water spots the way a gloss tile does, which makes it practical around a basin or in a kitchen. Use it on walls and floors indoors.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.26 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Lay on a full bed of flexible porcelain adhesive, back-buttering larger wall tiles so they sit flat. Keep joints at around 2mm with a grout in a matching warm tone. Mix tiles from several boxes as you go. Porcelain needs a diamond blade or wet cutter for clean cuts.

See the whole range

The Gulfport range covers six gently shaded neutral concrete tones, from ice white through warm beige and taupe grey to light, mid and dark grey. Every colour is a natural matt porcelain and every one is available in 300x600mm, 600x600mm and 600x1200mm. See every Gulfport tile.