Multipanel Bolsena Vinyl Click Chevron Flooring – 2.29m² Pack (MCDCBOL)

Multipanel Bolsena Vinyl Click Chevron Flooring – 2.29m² Pack (MCDCBOL)

Multipanel Bolsena is a warm brown wood-effect chevron with a striking V-pattern layout. It is a 100% waterproof vinyl click flooring from Grant Westfield, the makers of Multipanel wall panels – designed to sit alongside Multipanel walls and fitted without any adhesive. Planks come in A and B versions that click together in alternating rows to form the chevron pattern.

Key features

• 100% waterproof – suitable for bathrooms, en-suites, kitchens and hallways
• Click-together joints – no adhesive and no underlay needed
• Can be laid over most flat, existing hard floors, including old tiles
• Hard-wearing 0.5mm wear layer with a ceramic bead coating
• Warmer and quieter underfoot than ceramic tiles, and easy to clean
• 30-year warranty

How much do I need?

Each pack covers 2.29m² (8 pieces). Measure the length and width of the room in metres, multiply them together to get the floor area, then add 10% for cutting and divide by 2.29. For example, a 2m x 1.8m bathroom is 3.6m²; adding 10% gives about 3.96m², so you would need 2 packs.

Fitting

• A floating floor – it must not be glued, nailed or screwed down
• The floor underneath must be flat, smooth and clean. Not suitable over carpet or on stairs
• Leave a 10mm expansion gap around the edges of the room and around pipes, then cover it with a trim
• Seal around baths, shower trays and toilets with 100% silicone sealant
• Leave the packs in the room for 48 hours before fitting so they settle to room temperature
• Cut by scoring with a sharp knife and snapping
• Not suitable for use with electric underfloor heating

Care

Sweep or vacuum, then clean with a damp mop and a mild detergent. Long periods of strong direct sunlight may cause slight fading.

Codes

Specification

More information

Bolsena on the Multipanel website