Multipanel Tile Dust Grey Herringbone Bathroom Wall Panel 2400 x 598mm – Matt (MT732HT7228)

Multipanel Tile Dust Grey Herringbone Bathroom Wall Panel 2400 x 598mm – Matt (MT732HT7228)

Multipanel Tile Dust Grey Herringbone (MT732H) features small slim medium cool grey tiles laid in a herringbone zig-zag. The panel is printed and etched as a herringbone pattern of 410 x 123mm tiles for a classic, eye-catching feature wall; the 2.5mm pale grey grout lines are part of the surface, so there is no real grout to clean, seal or go mouldy. Made in Britain by Grant Westfield, it is a waterproof, quick-to-fit alternative to tiling.

Key features

• Tile effect: 410 x 123mm tiles, with etched 2.5mm pale grey grout lines you can see and feel
• 100% waterproof – suitable for showers, bathrooms and wet rooms
• Hydrolock tongue and groove edge for a near-seamless, watertight join between panels
• Can be fitted over existing sound tiles, saving the mess of removing them
• Matt finish, 2400 x 598mm, 11mm thick
• 30-year Multipanel warranty when fitted, sealed and maintained to Multipanel's published guidelines
• Made in Britain, FSC® certified materials (C128180), 100% recyclable

How to work out how many panels you need

Each panel covers 598mm of wall width (580mm of visible face once joined) and is 2400mm tall. Measure the width of each wall, divide by 580mm and round up. For example, a 1200mm shower wall needs 3 panels, and a 900mm wall needs 2. If your ceiling is higher than 2400mm, finish the top edge with a Type C end cap. Allow extra for windows or boxing.

Pairing ideas

Tile Collection panels share their decors with the Multipanel Pure Collection, so you can fit a tiled shower wall and a plain matching wall elsewhere in the room in the same colour.

Fitting

• Fix with Multipanel High Grab Panel Adhesive & Sealant – this is required for the warranty
• Seal every edge and joint with silicone sealant for a fully watertight finish
• Finish corners and open ends with Multipanel profiles: Type A internal corners, Type B external corners, Type C end caps, or the Type 102 angle profile
• Store panels flat and leave them in the room at normal temperature for 48 hours before fitting
• Multipanel recommend panels are fitted by a professional installer

Common reasons for returns

• Not ordering enough panels – remember each one covers 580mm of visible width
• Not allowing for profiles, adhesive and sealant – these are sold separately
• Panels damaged by being stored on edge or in a cold garage – store flat, indoors

Care

Clean with warm water and a mild, non-abrasive detergent. Do not use scouring powders or abrasive pads.

Sizes and codes

Specification

Downloads

Multipanel installation guides and warranty · Specification data