Naturepanel Beige Grey Lorenzo Oak Shiplap Bathroom Wall Panel 2400 x 598mm (NP314619WT8981)

Naturepanel Beige Grey Lorenzo Oak Shiplap Bathroom Wall Panel 2400 x 598mm

Naturepanel Beige Grey Lorenzo Oak Shiplap is a soft beige-grey oak laid as five wide shiplap boards – a gentle, neutral backdrop. It is a 100% waterproof, grout-free wall panel from Naturepanel by Grant Westfield, the makers of Multipanel – giving the warmth of real timber in bathrooms, showers and kitchens without any of the upkeep.

Key features

• 100% waterproof – suitable for showers, bathrooms, wet rooms and kitchens
• 5 wide boards of roughly 117mm on each panel, separated by a fine 2.3mm graphite grey etched shadow gap
• No grout lines – nothing to discolour or go mouldy, just wipe clean
• Hydrolock tongue and groove joint – panels lock together for a near-seamless, watertight join
• 598mm wide, 11mm thick, 2400mm tall
• 30-year warranty when fitted, sealed and maintained to Naturepanel's published guidelines
• FSC® certified materials (C128180), sustainably sourced and recyclable

Wood Slat or Shiplap?

Shiplap panels have 5 wide boards per panel, giving a classic tongue-and-groove plank look. Both styles come in the same seven decors and fit together with the same Hydrolock joint and profiles.

Sizes

• 2400 x 598mm – suits standard ceiling heights.

How to work out how many panels you need

Each panel is 598mm wide. Once the Hydrolock joints are locked together, each panel covers about 580mm of wall. Measure the width of each wall, divide by 580 and round up. For example, a 1200mm wall needs 3 panels (1200 ÷ 580 = 2.07, rounded up to 3). Allow a little extra if a wall has a window or boxing to cut around.

Fitting

• Fix with High Grab Panel Adhesive & Sealant – Graphite Grey is made to match the etched shadow gaps on the panels
• Seal every edge and every joint with silicone sealant for a fully watertight finish
• Finish corners and edges with profiles: Type C end cap for open edges, Type 100 flush corner, Type 101 invisible corner, and Type 102 angle profile – available in brushed brass, satin anodised, matt black and gloss white
• Store panels flat (not on edge) and leave them in the room at normal temperature for 48 hours before fitting
• We recommend panels are fitted by a professional installer

Common reasons for returns

• Ordering too few panels – remember each panel covers about 580mm once joined
• Not allowing for profiles, adhesive and sealant – these are sold separately
• Panels damaged by being stored on edge or in a cold garage – store flat, indoors

Care

Clean with warm water and a mild, non-abrasive detergent. Do not use scouring powders or abrasive pads.

Sizes and codes

Specification

More information

Beige Grey Lorenzo Oak on the Naturepanel website · Naturepanel profiles and accessories