Newport Ivory Stone Effect Matt Porcelain Wall & Floor Tile 100x600mm (Per Box of 14 Tiles)

Sold by the box – 14 tiles per box, covering around 0.84m². Each 100x600mm tile is 0.06m², so a box works out at roughly £77.26 per m² (£4.64 a tile). We only supply full boxes.

A narrow 100x600mm plank in the ivory limestone effect. The earthy beige tones vary gently from piece to piece, and the matt finish gives a soft, organic look. The plank format suits a border, a skirting line, a shower niche or a whole wall laid in a brick bond.

Fourteen tiles come in a box, covering 0.84m². Use it on its own as a feature wall, or run it alongside the 300x600mm and 600x1200mm ivory tiles in the same range as a trim. The manufacturer lists it for walls and floors in bathrooms and kitchens.

Porcelain, so it is dense and water-resistant and does not need sealing. The matt surface is easy to keep clean. It is listed for walls and floors, and the plank format also suits a stair riser or a step edge.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 0.84 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Set out the planks carefully because a 100mm module shows any drift in the joint lines. Use a flexible porcelain adhesive with a fine notch for walls and a full bed on floors. Keep joints at 2-3mm and use a beige grout. Mix planks from more than one box so the tonal variation is spread.

See the whole range

Newport is a soft limestone-effect porcelain. Choose cream at 600x600mm or ivory at 100x600mm, 300x600mm and 600x1200mm, and add the anti-slip ivory 300x600mm where floors get wet, so one stone tone can cover the whole bathroom. See every Newport tile.