Ocean City Grey Stone Effect Matt Porcelain Wall & Floor Tile 600x600mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 1.08m². Each 600x600mm tile is 0.36m², so a box works out at roughly £52.22 per m² (£18.80 a tile). We only supply full boxes.

A mid grey with a slight silver cast and the subdued, concrete-like surface of a honed stone. The matt finish takes the shine off and lets the tonal variation show, so a large floor has quiet movement in it rather than one flat tone. It is a neutral that suits white, black or timber.

The 600x600mm format is made for floors that need to feel bigger: hallways, kitchens, living areas and larger bathrooms. Lay it in a grid for a clean modern look or stagger it. It can also go up the wall of a shower enclosure to continue the floor.

Dense matt porcelain, suitable for indoor floors and walls, and easy to keep clean. Three tiles to a box, covering 1.08m². For walls there is a matching 300x600mm grey ceramic tile and a brick-relief decor in the same tone.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a flexible, cement-based adhesive suited to porcelain, applied to both tile and floor for full contact. Allow a 3mm grout joint. A tile levelling kit is worth using at this size. Where it goes on a wall, make sure the board or plaster can carry the load.

See the whole range

Across the Ocean City range the same four stone colours appear in three formats: a large matt porcelain square for floors and walls, a satin ceramic wall tile and a brick-relief decor, all meant to be mixed in one scheme. See every Ocean City tile.