Savannah Sand Stone Effect Matt Porcelain Wall & Floor Tile 1200x1200mm (Per Tile)

Priced per tile. Each 1200x1200mm tile is supplied individually, so you can order the exact number you need.

A single 1200x1200mm porcelain slab in warm sand. The beige aged-stone surface carries soft sediment markings across the whole tile, and with a joint only every 1.2 metres a floor laid with it has very little grid to break up the colour. The matt finish keeps the tone soft.

Sold per tile, so you can order to the square metre without rounding up to boxes. It is intended for large open floors, generous bathrooms and long hallways, and it can be used on indoor walls where a big, uninterrupted panel is wanted behind a bath or basin.

The porcelain is dense and durable and the colour matches the smaller sand tiles, the brick decor and the mosaic in the range, so a floor in this slab can sit beside walls in a smaller format. Each tile covers 1.44 square metres.

Specification

Working out how many you need

Measure the area or run you are covering, allow 10% extra for cuts and breakages, and order the full quantity together so everything comes from the same batch.

Fitting notes

Handle with two people and check the floor is flat before you start; a slab this size will rock on a high spot. Fix with a flexible porcelain adhesive, large notched trowel, full back-buttering and levelling clips on every edge. A 2-3mm joint in a sand grout. Cut with a wet saw or rail cutter.

See the whole range

Sand and light grey are the two Savannah colours, each made in a 300x300mm mosaic, 300x600mm, 600x600mm, 600x1200mm and 1200x1200mm plain tiles and a 600x1200mm brick decor, so one aged-stone surface can be used at every scale in a scheme. See every Savannah tile.