Savannah Sand Stone Effect Matt Porcelain Wall & Floor Tile 600x600mm (Per Box of 4 Tiles)

Sold by the box – 4 tiles per box, covering around 1.44m². Each 600x600mm tile is 0.36m², so a box works out at roughly £52.29 per m² (£18.82 a tile). We only supply full boxes.

Warm, sandy beige in a 600x600mm porcelain square. The surface takes its cue from aged limestone, with fine sediment lines and soft colour shifts across each tile, and a matt finish that reads as natural stone rather than a glossy print. It brings warmth to a room without strong colour.

The square format is simple to lay and plan. It suits a bathroom floor, a kitchen or a conservatory, and it goes on walls indoors too, so a shower room can be tiled throughout in one tile. Pair it with the sand brick decor for a textured feature wall.

Dense porcelain copes with water, footfall and the sun in a conservatory. The colour matches the other sand formats in the range, from the mosaic to the 1200mm slab. Four tiles in a box cover 1.44 square metres, so allow extra for cuts.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.44 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Fix on a flat, primed substrate with a flexible porcelain adhesive, full-bed on floors. A 2-3mm joint and a beige or sand grout blend with the tile; a lighter grout will show the grid. Dry-lay a row to check cuts, and draw from more than one box as you work.

See the whole range

Savannah offers an aged-stone porcelain in sand and light grey, with plain tiles from 300x600mm through 600x600mm and 600x1200mm up to 1200x1200mm, plus a 600x1200mm brick decor and a 300x300mm mosaic, so textures and scales can be layered in one colour. See every Savannah tile.