Wilmington Grey Plain Matt Porcelain Wall & Floor Tile 600x1200mm (Per Box of 2 Tiles)

Sold by the box – 2 tiles per box, covering around 1.44m². Each 600x1200mm tile is 0.72m², so a box works out at roughly £61.60 per m² (£44.35 a tile). We only supply full boxes.

A mid grey with a natural matt surface, sitting between the paler silver and the darker carbon in this range. The tone is even across the tile, so a floor reads as one calm plane rather than a patchwork. It works with white sanitaryware, timber and black fittings alike.

At 600x1200mm this is the largest format in the range. Two tiles cover 1.44m², so a bathroom floor needs few joints and a wall can be clad with a handful of pieces. Lay it in a straight stack or a half-brick bond; both suit the rectified edge.

The porcelain is full-bodied, so the grey runs right through the tile rather than sitting on the surface as a glaze. The manufacturer rates it for walls and floors in homes and commercial spaces, including bathrooms, kitchens, conservatories, hallways and living areas.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.44 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a flexible cementitious adhesive suited to porcelain and bed the tile fully on floors, back-buttering each piece. Check the substrate is flat before you start, because a 1200mm tile shows any dips. The rectified edge allows a 2-3mm grout joint. A levelling clip system helps keep the surface flush.

See the whole range

Wilmington is a plain full-bodied porcelain in nine shades, from snow and white through cream, beige, dove, silver and grey to carbon and black. Each colour comes in natural matt, polished or anti-slip, across 300x600mm, 600x600mm and 600x1200mm, with a matching 35x35mm mosaic sheet. See every Wilmington tile.