Wilmington Silver Plain Anti-Slip Porcelain Wall & Floor Tile 600x600mm (Per Box of 3 Tiles)

Sold by the box – 3 tiles per box, covering around 1.08m². Each 600x600mm tile is 0.36m², so a box works out at roughly £46.02 per m² (£16.57 a tile). We only supply full boxes.

For a level-access shower or wet room floor, this silver grey anti-slip tile gives a light, cool colour with a textured surface for grip. The pale grey hides water marks better than white. It is also rated by the manufacturer for external use.

The 600x600mm format covers 1.08m² per box of three. It lays in a straight grid and, with rectified edges, takes a 2-3mm joint. Use it indoors and continue the same tile onto a terrace for a run-through floor.

Full-bodied porcelain stoneware, so the silver colour is the same through the tile. The manufacturer lists bathrooms, kitchens, conservatories, hallways, living areas and external areas as suitable. Use it with the silver matt 300x600mm on the walls so the shower area and the rest of the room share one colour.

Specification

Working out how many boxes

Measure the wall or floor in square metres, add 10% for cuts and breakages, divide by 1.08 and round up to the next whole box. Order everything you need in one go – shade can vary a little between production batches, and buying all your boxes together keeps the whole area from the same run.

Fitting notes

Use a flexible cementitious adhesive, fully bedded, and an external-grade adhesive and grout outside. Grout the textured surface in small areas and wipe clean before it dries. On a wet room floor cut tiles to follow the falls to the drain. Set the joints at 2-3mm for the rectified edge.

See the whole range

Wilmington is a nine-colour plain porcelain, snow, white, cream, beige, dove, silver, grey, carbon and black, in matt, polished and anti-slip finishes. Sizes are 300x600mm, 600x600mm and 600x1200mm, with a 35x35mm mosaic sheet to match. See every Wilmington tile.